A quick project to clean up an old tractor work light that was in one of the rear toolboxes. The inside was quite rusty and the ground poor but with a bit of work it functions again. There are some pin holes rusted through the body that need to be addressed at some point and it is mounted with a makeshift mirror arm bracket for the time being. The back of the sealed bulb reflector is stamped “tung-sol elec inc.”, the back of the glass imprinted “made in usa”, and the back of the steel cover is stamped “saf-t-ray”. Currently can be connected to the wiper positive post with a small alligator clip to light up when the ignition is on.
